Looking for Robotic Add-ons? Click Here

Overhead Conveyor Maintenance Tips

Jul 8, 2014 | Blog

overhead conveyor maintenance

3 common conveyor problems and how to prevent them with overhead conveyor maintenance videos that show you how

Simple overhead conveyor maintenance can ensure your equipment will perform well for years!

1. Lack of take-up adjustment

This is such a simple adjustment on most systems that it is hard to accept how often it is overlooked. The chain take-up device ensures that the chain is pulled tight as it leaves the drive unit. As wear occurs and the chain lengthens, the take-up extends under the force of its springs. As they extend, the spring force becomes less and the take-up has less effect. Simply compress the take-up springs and your problem goes away. Failure to do this can result in chain surging, jamming, and extreme wear on the track and chain.

Here is another video you may find helpful:
Understanding and Maintaining the Conveyor Drive Unit

2. Lack of lubrication

Chain bearings require lubrication in order to reduce friction. The chain pull that the drive experiences can double if the bearings are not lubricated. This can cause the system to overload by either its mechanical overload protection or its electrical overload protection. On conveyors that go through hot ovens, lubricators can be left on constantly or set to turn on every few cycles of the chain.

Tip: A modern lubricator with a small “brain” that turns itself on and off according to your needs will make the process easier to manage.

3. Contamination of track and chain

Paint, powder, acid or alkaline fluids, abrasives, glass beads, steel shot and so on can all lead to rapid deterioration of the track and chain. Ask any bearing company about the leading cause of bearing failure and they will point to contamination. Once a foreign substance lands on the raceway of a bearing or on the track, pitting of the surface will occur, and once the surface is compromised, wear will accelerate.

Tip: Build shrouds around your conveyors to prevent the ingress of contaminants. Better yet, shroud and then pressurize the contained area using a simple fan and duct arrangement.

Read this article to learn some more tips on how to increase the life of your conveyors!


  • This field is for validation purposes and should be left unchanged.